menu
Parviz Asadi

Associate Professor

Update: 2024-06-26

Parviz Asadi (Faculty Member)

Technical & Engineering /

Journal Paper

  1. "Selection of Optimal Tool Geometry for the Production of Brass Wires Using the FSBE Method"
    M Akbari, Parviz Asadi, H Rahimi Asiabaraki
    Journal of Solid Mechanics, Vol. 15, pp.66-77, 2023
  2. "Modeling and optimization of process parameters of the piston alloy-based composite produced by FSP using response surface methodology"
    Mostafa Akbari, Parviz Asadi, MohammadReza Mohammad Aliha, Filippo Berto
    SURFACE REVIEW AND LETTERS, Vol. 30, pp.1-15, 2023
  3. "Production of LM28 Tubes by Mechanical Alloying and Using Friction Stir Extrusion"
    Parviz Asadi, Mostafa Akbari, Mahyar Talebi, , Tomasz Sadowski, Mohammad Reza Mohammad Aliha
    Crystals, Vol. 13, 2023
  4. "Investigation of the effect of tool probe profile on reinforced particles distribution using experimental and CEL approaches"
    Mostafa Akbari, Morteza Ezzati, Parviz Asadi
    International Journal of Lightweight Materials and Manufacture, Vol. 5, pp.213-223, 2022
  5. "Multivariate optimization of mechanical and microstructural properties of welded joints by FSW method"
    Parviz Asadi, M.R.M. Aliha, Mostafa Akbari, D.M. Imani, Filippo Berto
    ENGINEERING FAILURE ANALYSIS, Vol. 140, pp.1-11, 2022
  6. "INVESTIGATION OF WEAR AND MICROSTRUCTURAL PROPERTIES OF A356/ TiC COMPOSITES FABRICATED BY FSP"
    MOSTAFA AKBARI, Parviz Asadi, HOSSEIN RAHIMI ASIABARAKI
    SURFACE REVIEW AND LETTERS, Vol. 29, pp.1-10, 2022
  7. "Characterization of the Influence of Rotational and Traverse Speeds on the Mechanical and Microstructural Properties of Wires Produced By the FSBE Method"
    Parviz Asadi, Mostafa Akbari, Omid Kohantorabi, , M. R. M. Aliha, S. M. Salehi, H. R. Asiabaraki, Filippo Berto
    STRENGTH OF MATERIALS, Vol. 54, pp.318-330, 2022
  8. "Modeling of pin shape effects in bobbin tool FSW"
    Parviz Asadi, Mohammad hosein Mirzaei, Mostafa Akbari
    International Journal of Lightweight Materials and Manufacture, Vol. 5, pp.162-177, 2022
  9. "Effects of different cooling conditions on friction stir processing of A356 alloy: Numerical modeling and experiment"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 236, pp.4133-4146, 2022
  10. "Simulation and experimental investigation of multi-walled carbon nanotubes/aluminum composite fabrication using friction stir processing"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 235, pp.2165-2179, 2021
  11. "Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion"
    Parviz Asadi, Mostafa Akbari
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 119, pp.1-15, 2021
  12. "Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method"
    Mostafa Akbari, Parviz Asadi, Reza Abdi Behnagh
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 113, pp.721-734, 2021
  13. "A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion"
    Mostafa Akbari, Parviz Asadi, Hossein Rahimi Asiabaraki
    Iranian Journal of Materials Forming, Vol. 8, pp.46-62, 2021
  14. "Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method"
    Mostafa Akbari, Parviz Asadi, Hossein Rahimi Asiabaraki
    Journal of Modern Processes in Manufacturing and Production, Vol. 10, pp.53-62, 2021
  15. "Material flow modeling for the DSFSW of magnesium alloy"
    Parviz Asadi, Mohammad hosein Mirzaei
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 56, pp.275-290, 2021
  16. "Formability study and metallurgical properties analysis of FSWed AA 6061 blank by the SPIF process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    SN Applied Sciences, Vol. 3, pp.1-23, 2021
  17. "Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 12, pp.2709-2719, 2021
  18. "Effect of Tool Pin Shape on Defect-Free FSP and Particles Distribution in SiC/Al6061 Composites"
    Morteza Ezzati, Parviz Asadi, Mostafa Akbari
    Journal of Advanced Materials and Processing, Vol. 9, pp.49-62, 2021
  19. "Numerical investigation on the effect of welding speed and heat input on the residual stress of multi-pass TIG welded stainless steel pipe"
    Parviz Asadi, Samaneh Alimohammaditatar, Omid Kohantorabi, Ali Soleymani, Ali Fazli
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 235, pp.1007-1021, 2021
  20. "Effects of material type, preheating and weld pass number on residual stress of welded steel pipes by multi-pass TIG welding (C-Mn, SUS304, SUS316)"
    Parviz Asadi, Samaneh Alimohammaditatar, Omid Kohantorabi, Ali Fazli, Mostafa Akbari
    Thermal Science and Engineering Progress, Vol. 16, pp.1-12, 2020
  21. "Effect of Tool Pin Profile on Material Flow in Double Shoulder Friction Stir Welding of AZ91 Magnesium Alloy"
    Mohammad hosein Mirzaei, Parviz Asadi, Ali Fazli
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 183, 2020
  22. "Dissimilar friction stir lap welding of aluminum to brass: Modeling of material mixing using coupled Eulerian-Lagrangian method with experimental verifications"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 234, pp.1117-1128, 2020
  23. "Optimization of microstructural and mechanical properties of friction stir welded A356 pipes using Taguchi method"
    Mostafa Akbari, Parviz Asadi
    Materials Research Express, Vol. 6, 2019
  24. "Formation of thermo-mechanically affected zone in friction stir welding"
    Parisa Zolghadr, Mostafa Akbari, Parviz Asadi
    Materials Research Express, Vol. 6, 2019
  25. "Formability analysis of dissimilar friction stir welded AA 6061 and AA 5083 blanks by SPIF process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    CIRP Journal of Manufacturing Science and Technology, Vol. 25, pp.50-68, 2019
  26. "Wear and mechanical properties of surface hybrid metal matrix composites on AlSi aluminum alloys fabricated by friction stir processing"
    Mostafa Akbari, Mohammad Hasan Shojaeefard, Parviz Asadi, Abolfazl Khalkhali
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 2, pp.1464420717-1464420726, 2017
  27. "The effect of reinforcement type on the microstructure mechanical properties and wear resistance of A356 matrix composites produced by FSP"
    Mohammad Hasan Shojaeefard, Mostafa Akbari, Parviz Asadi, Abolfazl Khalkhali
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 91, pp.1391-1407, 2017
  28. "Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles"
    Mostafa Akbari, Mohammad Hasan Shojaeefard, Parviz Asadi, Abolfazl Khalkhali
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 3, pp.1-14, 2017
  29. "Multicriteria optimization of mechanical properties of aluminum composites reinforced with different reinforcing particles type"
    Mostafa Akbari, Parviz Asadi, Parisa Zolghadr, Abolfazl Khalkhali
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 1, pp.954408917-954408931, 2017
  30. "Hybrid multi-objective optimization of microstructural and mechanical properties of B 4 C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II"
    Mostafa AKBARI, Mohammad Hasan SHOJAEEFARD, Parviz Asadi, Abolfazl KHALKHALI
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 27, pp.2317-2333, 2017
  31. "Experimental Investigation of Welding Defects in Butt Joining of Aluminum Alloy by Friction Stir Welding: Effects of Tool Pin Profile and Process Parameters"
    مصطفي اكبري, Parviz Asadi
    Vol. 19, pp.125-143, 2022
  32. ""
    حسين رحيمي, مصطفي اكبري, Parviz Asadi
    Vol. 9, pp.52-59, 2022
  33. "The effect of the die geometry on the joint strength of Al 3105 aluminum sheets joined by the clinching process"
    Mohammad hosein Mirzaei, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 7, pp.10-23, 2021
  34. "Experimental investigation of the joinability of three-layer aluminum/ polymer/ aluminum composite sheets by the clinching process"
    Rasoul Naderli, Ali Fazli, Mahdi Soltanpour, Parviz Asadi
    Vol. 8, pp.27-38, 2021
  35. ""
    hossein yousefi, Mehdi Dianati, Omid Kohantorabi, Parviz Asadi
    Vol. 29, pp.34-46, 2020
  36. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 26, pp.22-39, 2018
  37. "Experimental and numerical investigation of the formability of friction stir welded 5083 aluminum alloy sheets in single point incremental forming process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 18, pp.45-55, 2018

Conference Paper

  1. ""
    Ali Fazli, Parviz Asadi, Hamed Barotiha, Mojtaba Mashayekhi
    , pp.1-6, 2023
  2. ""
    Hosein Rahimi Asiabaraki, Parviz Asadi, Mostafa Akbari, Morteza Ezzati
    , 2022
  3. ""
    Mostafa Akbari, Parviz Asadi, Hosein Rahimi Asiabaraki
    , 2022
  4. ""
    Mohammad hosein Mirzaei, Parviz Asadi, Ali Fazli, Mohammad Mehrabadi
    , 2019
  5. ""
    Mohammad Mohebi rad, Parviz Asadi, Mohammad hosein Mirzaei, Mehran Shafiee alavijeh
    , 2019
  6. ""
    Mehran Shafiee alavijeh, Parviz Asadi, Mohammad hosein Mirzaei, Mohammad Mohebi rad
    , 2019
  7. ""
    Seyyed Masoud Mirbabashahi, Parviz Asadi, Mohammadreza Ebrahimian
    , pp.1-13, 2019
  8. ""
    Keyvan Soleymanpour, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    , pp.1-6, 2019
  9. ""
    Samaneh Alimohammaditatar, Mahdi Soltanpour, Ali Fazli, Parviz Asadi
    , 2019
  10. ""
    Mohsein Ashrafi, Parviz Asadi, Mohammadreza Ebrahimian
    , 2019
  11. "Particle and hardness distribution in Al6061/SiC composite produced by FSP Investigation of edged pin profiles"
    Morteza Ezzati, Parviz Asadi
    1st National Conference on Micro/Nanoscale Technologies, 2018
  12. "Considering the Effect of thresded pin profiles on particle distribution and tensile strength of Al6061/SiC composite produced by FSP"
    Morteza Ezzati, Parviz Asadi
    1st National Conference on Micro/Nanoscale Technologies, 2018
  13. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    , pp.1-9, 2017
  14. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Fateme Yousefi
    , pp.1-8, 2017